Electric Utility Pump Kits

See Water’s Oil Smart® Electric Utility Kits are specifically designed for transformer containment vaults where there is a need to pump water without the risk of pumping hydrocarbons. Oil Smart® systems are the proven solution for the proper evacuation of water while complying with state and federal regulatory requirements (EPA SPCC &IEEE 980). The utility kits come complete with an Oil Smart® pump controller and heavy duty sump pump.

Model Volts Max. Load Assembly Pumping Range
OSS20R6 120 60Hz. 1HP Bare Leads 6″
OSS20PBPR6 120 60Hz. 1HP Piggyback Plug 6″
OSS20R6E 230 50/60Hz. 1HP Bare Leads 6″

Features

  • Directly controls sump pumps 0 to 1 hp (piggyback): quick installation
  • Available in 120 VAC, 230 VAC 50/60 Hz., or 12/24 VDC
  • No expensive electrical panel required
  • Sensors differentiate between oil and water
  • Differential between on and off comes in 2.5″or 6″ models
  • Available with or without a piggyback plug
  • Helps satisfy elevator code ASME A17.1 and EPA, The Spill Prevention, Control, and Countermeasure Plan

Testing Made Easy!

A concept offered only by See Water Inc. Contractors have the luxury of testing the Oil Smart switch and alarm at any common receptacle prior to installation and during critical troubleshooting. Test with your fingers -no oil or water required!

Applications

  • Elevator Sumps
  • Electric Utilities ( Substations, Power Plants, Underground Vaults, and Transformer Barriers
  • Any Industrial Sump or Marine Application
Model Circuit Breaker VAC Phase Operates Pumps Up To
OSSIM-30   120/208/240 Single 1HP @ 120V
2HP @ 208/240V
OSSIM-30-CB Yes 120/208/240 Single 1HP @ 120V
2HP @ 208/240V

Features

  • Panel and Controls UL Listed for United States and Canada.
  • Pump Control and High Liquid Alarm differentiate between oil and water - Includes Oil Smart®-Pump Control, and Liquid Smart® Alarm Switch, and 20′ Cords
  • Pump Control Visible Indicators: Pump Hand-Off-Auto (H.O.A.) Switch, Green Pump Run Light and Power On Light
  • Alarm Visible Indicators: Red Beacon Alarm Light, Yellow Light for Oil, White Light for Water, Alarm Test and Silence Buttons
  • Alarm Horn Sounds at 85 Decibels at 10 Feet
  • Complete Panel Remote Monitoring Dry Contacts: Oil, Water, High Liquid

Specifications

  • 10″x8″x4″ UL-50 Type 6P Listing
  • Outdoor/Indoor NEMA 4X enclosure, heavy duty Polycarbonate construction

Applications

  • Elevator
  • Electric Utilities ( Substations, Power Plants, Underground Vaults, and Transformer Barriers)
  • Any Industrial Sump or Marine Application
Model Voltage Full Load Amps
OSSIM-TP-1001 120/208/240 0-7.0
OSSIM-TP-1002* 120/208/240 7.0-15.0
OSSIM-TP-1003 120/208/240 15.0-22.0
OSSIM-TP-1004 120/208/240 22.0-28.0
*If Model # OSSIM-TP-1 is ordered, the OSSIM-TP-1002 will be shipped.

Note: Thermal overload protection is generally provided in single phase pumps. To request a specific overload on the Oil Smart® Single Phase Models, contact the factory. Each panel includes a motor protector switch that will provide accurate pump circuit breaker protection.

Features

  • Panel and controls: UL listed for the United States and Canada
  • Indoor/Outdoor NEMA 4X panel enclosure: heavy duty polycarbonate with stainless steel lockable latches
  • Pump control visible indicators: pump hand-off-auto (H.O.A.) switch, green pump run light, red pump fault light, and green power on light
  • Alarm visible indicators: red beacon alarm light, yellow light for oil, white light for water, alarm test and silence buttons
  • Alarm horn sounds at 85 decibels at 10 feet
  • Remote monitoring dry contacts: oil, water, high liquid, pump run, and pump fault
  • Upgraded pump protection: motor protective switch (branch circuit protection, adjustable overload and disconnect), and a thermal cutout with indicator.

Applications

  • Elevator sumps
  • Transformer containment areas
  • Underground utility vaults
  • Any application where there is a need to remove water while containing oil
Model Voltage Full Load Amps
OSD1P-1021 120/208/240 0-7.0
OSD1P-1022* 120/208/240 7.0-15.0
OSD1P-1023 120/208/240 15.0-22.0
OSD1P-1024 120/208/240 22.0-28.0
*If Model # OSD1P is ordered, the OSD1P-1022 will be shipped

Note: Thermal overload protection is generally provided in single phase pumps. To request a specific overload on the Oil Smart® Single Phase Models, contact the factory. Each panel includes a motor protector switch that will provide accurate pump circuit breaker protection.

Features

  • Panel and controls: UL listed for the United States and Canada
  • Indoor/Outdoor NEMA 4X panel enclosure: heavy duty polycarbonate with stainless steel lockable latches
  • Pump control visible indicators: pump hand-off-auto (H.O.A.) switches, green pump run lights, red pump fault lights, and green power on light
  • Alarm visible indicators: red beacon alarm light, yellow light for oil, white light for water, alarm test and silence buttons
  • Alarm horn sounds at 85 decibels at 10 feet
  • Duplex provides: two pump alternation and high demand two pump operation
  • Remote monitoring dry contacts: oil, water, high liquid, pump run (s), pump #1 fault, and pump #2 fault
  • Upgraded pump protection: motor protective switches included for both pumps (branch circuit protection, adjustable overload and disconnect), and thermal cutout with indicators.

Applications

  • Elevator sumps
  • Transformer containment areas
  • Underground utility vaults
  • Any application where there is a need to remove water while containing oil
Model Volts Max. Load FLA Type
151 120 60Hz. 1/3 HP 6 Cast Iron
152 120 60Hz. 4/10 HP 8.5 Cast Iron
153 120 60Hz. 1/2 HP 10.5 Cast Iron

Pump Features

  • Made of durable cast iron
  • Automatic reset thermal overload protected
  • Non-clogging vortex impeller
  • Model 151 - 1/3 HP Passes 1/2” spherical solids
  • Model 152 - .4 HP Passes 3/4” spherical solids
  • Model 153 - 1/2 HP Passes 3/4” spherical solids
  • CSA Certified C/US Tested to UL Standard CSA22.2 No. 108


Model 151
Model 152 & 153
Get in Touch: 888-733-9283