Single Phase Oil Smart®
Removal Systems

SEE Water, Inc.
121 N. Dillon Street
San Jacinto, CA 92583

Voice: (951) 487-8073
FAX: (951) 287-0557

Toll Free:
1-888-SEEWATER
(1-888-733-9283)

Pumps Water and Oil

Automatic removal of water and oil; designed for applications where immediate responsible removal of oil is required.

Models:

OSSIM-30-OR, Single Phase, 120/208/240VAC Operation: Will pump water to the normal discharge area and pump oil to a separate holding area; System is setup to work in conjunction with one pump, one normally open solenoid valve, and one normally closed solenoid valve (Solenoid Valve purchased separately).

OSSIM-30-OR-1, Single Phase 120/208/240VAC
Operation: Will pump water and oil to the normal discharge area. Equipped with an adjustable alarm timer to alarm when oil is present; timer is set to alarm for 30 seconds when oil is being pumped from containment areas.

OSSIM-30-OR-2, Single Phase 120/208/240VAC
Operation: Will pump water to the normal discharge area and pump oil to a separate containment area; System is setup to work in conjunction with two separate pumps.

Overview and Options

  • UL Listed for the United States and Canada (Panel and Controls)
  • Pump Control and High Liquid Alarm differentiate between oil and water; Includes Oil Smart® Pump Control, Liquid Smart Alarm Switch, Wide Angle Float Switch (OSSIM-30-OR-1, OSSIM-30-OR-2), Dual Float Switch (OSSIM-30-OR); 20' Cords Included
  • Pump Control Visible Indicators: Pump #1 Hand-Off-Auto (H.O.A.) Switch, Green Pump Run Light and Power On Light
  • Alarm Visible Indicators: High Red Beacon Alarm Light Yellow Light for Oil, White Light for Water, Alarm Test and Silence Buttons
  • High 85 Decibel Audible Alarm
  • Complete Panel Remote Monitoring Dry Contacts: Oil, Water, High Liquid
Applications
  • Elevator Sumps
  • Transformer Containment Areas


Catalog

*Please consult the factory for custom panel options