|
Automatic removal of water and
oil; designed for applications
where immediate responsible
removal of oil is required.
Models:
OSSIM-30-OR, Single Phase,
120/208/240VAC
Operation: Will pump water to the
normal discharge area and pump oil
to a separate holding area; System
is setup to work in conjunction
with one pump, one normally open
solenoid valve, and one normally
closed solenoid valve (Solenoid
Valve purchased separately).
OSSIM-30-OR-1, Single Phase
120/208/240VAC
Operation: Will pump water and oil
to the normal discharge area.
Equipped with an adjustable alarm
timer to alarm when oil is
present; timer is set to alarm for
30 seconds when oil is being
pumped from containment areas.
OSSIM-30-OR-2, Single Phase
120/208/240VAC
Operation: Will pump water to the
normal discharge area and pump oil
to a separate containment area;
System is setup to work in
conjunction with two separate
pumps.
Overview and Options
-
UL Listed for the United
States and Canada (Panel and
Controls)
-
Pump Control and High Liquid
Alarm differentiate between
oil and water; Includes Oil
Smart® Pump Control, Liquid
Smart Alarm Switch, Wide
Angle Float Switch
(OSSIM-30-OR-1,
OSSIM-30-OR-2), Dual Float
Switch (OSSIM-30-OR); 20’
Cords Included
-
Pump Control Visible
Indicators: Pump #1
Hand-Off-Auto (H.O.A.)
Switch, Green Pump Run Light
and Power On Light
-
Alarm Visible Indicators:
High Red Beacon Alarm Light
Yellow Light for Oil, White
Light for Water, Alarm Test
and Silence Buttons
-
High 85 Decibel Audible
Alarm
-
Complete Panel Remote
Monitoring Dry Contacts:
Oil, Water, High Liquid
Applications
-
Elevator Sumps
-
Transformer Containment Areas
Catalog
 |
|