Oil Smart Sump Pump System

Contractor shall furnish and install See Water Oil Smart® Duplex Panel Pump System or approved equal. Sump Pump System shall be capable of pumping water without the risk of pumping oil. The system shall automatically function as Oil Containment system relying on no moving parts. Pump Control shall automatically control pump to discharge water without pumping oil, while separate alarm on independent 120 VAC alarm circuit shall alarm and differentiate in the event of high oil or high water condition.

1. The Duplex Model # OSD1P-3 Panel consists of the Oil Smart Water Pump Controller with “on” and “off” specific pumping range, High Water 2 Pump Demand Switch and Liquid Smart Switch to detect high liquid level and differentiate between oil and water. The controls shall both be able to differentiate between oil and water and consist of no moving parts.
2. The wall-mount NEMA 4X, UL and CSA approved control panel shall feature visible, full-alarm and pump control capabilities featuring pump run, pump fault (no load lockout, pump seal failure) indicator, high liquid level, high water level and high oil level with auxiliary contacts for remote monitoring. HOA (Hands-Off-Auto) Switch shall be provided for manual pump operation. Control panel shall alternate between pumps each pump cycle in normal operation and in high demand situations both pumps shall be activated.
3. The system shall be combined with two Single Phase, 110/208/240 VAC effluent submersible pump and check valves.

Model OSD1P-3 (Click For More Information)