SEE Water, Inc.
121 N. Dillon Street
San Jacinto, CA 92583
Voice: (951) 487-8073
FAX: (951) 287-0557
Toll Free:
1-888-SEEWATER
(1-888-733-9283)
Engineering Specification
Model OSS-100 Oil Smart System
Oil Smart Sump Pump System
Contractor shall furnish and install See Water Oil Smart® Pump Controller and Alarm Panel Pump System or approved equal. Sump Pump System shall be capable of pumping water without the risk of pumping oil. The system shall automatically function as Oil Containment system relying on no moving parts. Pump Control shall automatically control pump to discharge water without pumping oil, while separate alarm on independent 120 VAC alarm circuit shall alarm and differentiate in the event of high oil or high water condition.
- The Oil Smart Pump Controller Model # OSS20PBPR6 consists of a piggyback plug and 20' cord with "on" and "off" sensors featuring a specific pumping range. The Alarm Panel Model #OSA-05 consists of 10' power cord, Liquid Smart Sensor and 20' cord; alarm sensor detects high liquid level and differentiates between oil and water. The pump control and alarm shall both be able to differentiate between oil and water and consist of no moving parts. The alarm component shall be completely seperate from pump control component to prevent nuisance alarms and so alarm component can be placed at high liquid level. An alarm component mounted on same fixture as pump control shall not be acceptable.
- The wall-mount NEMA 4X, UL and CSA approved control panel shall feature visible, full-alarm capabilities featuring high liquid level, high water level and high oil level with auxiliary contacts for remote monitoring. A NEMA 1 enclosure shall not be acceptable.
- The system shall be factory tested and combined with a Single Phase, 120 VAC effluent submersible pump.
Model OSS20PBPR6 (Click For More Information)
Model OSA-05 (Click For More Information)